 |
|
|
Mitsui HSG-818TEC Specifications |
|
|
Item |
HSG-818TEC |
|
Maximum table movement |
520X210mm |
|
Maximum height of grinding wheel center from table surface |
390mm |
|
Work surface |
500X180mm |
|
Table speed |
10mm/min~25m/min |
|
Vertical feed |
|
|
1) Per hand wheel revolution |
0.05mm/0.5mm/rev |
|
2) Minimum graduation |
0.0005mm/0.005mm |
|
3) Automatic incremental downfeed |
0.0005~0.0995mm |
|
4) Total grinding depth |
0~99.9995mm |
|
5) Spark out |
0~9times |
|
6) Speed of power elevation system |
230/50mm/min |
|
7) Jogging |
0.5 m stepping motor computer control |
|
8) Type of automatic downfeed |
Rough, Semi-finish, Finish |
|
9) Digital linear scale |
Glass scale, .0001 (0.001 mm) |
|
Crossfeed |
|
|
1) Per hand wheel revolution |
0.1/4mm/rev |
|
2) Minimum graduation |
0.001/0.04mm |
|
3) Digital linear scale |
Glass scale, .0001 (0.001 mm) |
|
4) Reversing position programming |
Teaching |
|
Longitudinal feed |
|
|
1) Reversing position programming |
Teaching |
|
2) Per hand wheel revolution |
0.5/50mm/rev |
|
3) Manual feed System |
Ball screw & AC Servomotor |
|
Table: overall length x width(including cover) |
1600X270mm |
|
Grinding wheel speed at 50 Hz by inverter |
500~4000r.p.m. |
|
Grinding wheel speed at 60 Hz by inverter |
500~4000r.p.m. |
|
Motor |
|
|
1) Spindle |
2P, 3HP (2.2kw), 200/220V, 60Hz |
|
2)Vertical drive |
5-phase stepping motor |
|
3) Crossfeed drive |
AC servomotor |
|
4) Longitudinal drive |
AC servomotor |
|
Grinding wheel size (Max.) |
0205 X 20mm X 01.75 |
|
Magnet chuck controller |
MAG-300HP. Variable adjust |
|
Lubrication |
Automatic lubrication |
|
Electric control |
MITSUI CPU |
|
Data input |
Conversational on CRT. |
|
Electric power source |
3-phase, 200/220V, 60H 220V 50Hz |
|
Required power |
5kVA |
|
Required floor space (width x depth) |
2100X1150mm |
|
Gross weigh |
2230kg |
|
1) Machine |
2000kg |
|
2) Control unit |
230kg |
 |  |  |