|
STANDARD ACCESSORIES |
|
WHEEL ADAPTER |
|
WHEEL PULLER |
|
JACK BOLTS AND LEVELING PLATES |
|
METRIC HAND TOOLS |
|
INSTRUCTION MANUAL |
|
STANDARD CONTROL FEATURES |
|
FULL MANUAL OPERATION MODE |
|
CAN BE OPERATED EXACTLY AS A MITSUI MANUAL GRINDER WHEN SET IN MANUAL MODE |
|
MANUAL SURFACE GRIND WITH AUTOMATIC DRESS |
|
ALLOWS OPERATOR TO GRIND MANUALLY, BUT DRESSES WHEEL AT A PUSH OF THE BUTTON, AND AUTOMATICALLY COMPENSATES THE DRESSING AMOUNT. |
|
QUICK SET: EASY TO USE, QUICK SET UP CYCLES |
|
DRESS CYCLES: STRAIGHT GRINDING CYCLES: SURFACE & PITCH SLOT |
|
POWER SET: CONVERSATIONAL & GRAPHIC CANNED CYCLES |
|
DRESS CYCLES: STRAIGHT, RADIUS, TAPER GRINDING CYCLES: SURFACE, PITCH SLOT, WIDE SLOT, RADIUS & TAPER |
|
TOUCH SCREEN TEACHING OF WHEEL & WORK LOCATIONS |
|
EASY CLEAR INSTRUCTIONS MAKE SET UPS EASY |
|
GRAPHIC INTERFACE FOR EASY SET UP |
|
GRAPHICAL INTERFACE IS LAID OUT TO MAKE CLEAR OPERATION ALLOWS OPERATORS TO GET TO GRINDING QUICKLY AND EASILY. |
|
STANDARD FEATURES |
|
ENLARGED BASE AND COLUMN |
|
FULLY RE-DESIGNED CASTING SAME AS USED IN MITSUI HIGH-RIGID SERIES |
|
3 AXES SERVO MOTOR DRIVEN: CROSS, VERTICAL 8s LONGITUDINAL AXES |
|
ALL AXES CONTROLLABLE THROUGH PC UNIT |
|
LONGITUDINAL AXES PROGRAMMABLE FOR HIGH ACCURACY REPEATABILITY |
|
ENCODER FEEDBACK ENABLES STOP AND SHOULD GRINDING |
|
SPINDLE/DIRECT DRIVE |
|
CARTRIDGE TYPE (REMOVABLE), (2) SETS OF DOUBLE ROW ANGULAR CONTACT SUPER PRECISION BALL BEARINGS. |
|
LUBRICATION |
|
AUTOMATIC LUBRICATOR FOR LONGITUDINAL WAYS, CROSS FEED WAYS, CROSS FEED BALL SCREW AND NUT, VERTICAL FEED WAYS AND VERTICAL PRECISION LEAD SCREW AND NUT. |
|
LONGITUDINAL MOVEMENT OF TABLE |
|
D-2 HARDENED & GROUND STEEL WAYS AND LINEAR BALL BEARING ON HAND SCRAPED CAST IRON |
|
CONSTRUCTION |
|
Meehantte cast iron throughout with base and column of box-shaped design with internal rib reinforcement, providing rigidity for heavy grinding. 5 point leveling system with base plates and jack bolts |
|
OPTIONAL ACESSORIES |
|
COOLANT TANK ASSEMBLY-21 GAL. WIRED 220/440 3 PHASE |
|
MAGNETIC SEPARATOR MOUNTED ON TANK(11 GAL/ MIN) |
|
G-CODE PROGRAMMING |
|
3 POINT DRESSING SYSTEM |
|
VARIABLE SPINDLE SPEED CONTROL |
|
6" X 12" OS WALKER FINE POLE, LBP ELECTROMAGNETIC CHUCK |
|
6" X 12" OS WALKER FINE POLE, LBP ELECTROMAGNETIC CHUCK WITH SMART1B CHUCK CONTROLLER INCLUDING DEMAGNIFICATION (CHUCK CONTROL SHIPPED UNMOUNTED) |
|
MITSUI MAGNETIC CHUCK CONTROL, BUILT IN |
